DBI/dbipport.h
/* ppport.h -- Perl/Pollution/Portability Version 2.0002
*
* Automatically Created by Devel::PPPort on Fri Jul 12 11:55:34 2002
*
* Do NOT edit this file directly! -- Edit PPPort.pm instead.
*
* Version 2.x, Copyright (C) 2001, Paul Marquess.
* Version 1.x, Copyright (C) 1999, Kenneth Albanowski.
* This code may be used and distributed under the same license as any
* version of Perl.
*
* This version of ppport.h is designed to support operation with Perl
* installations back to 5.004, and has been tested up to 5.8.0.
*
* If this version of ppport.h is failing during the compilation of this
* module, please check if a newer version of Devel::PPPort is available
* on CPAN before sending a bug report.
*
* If you are using the latest version of Devel::PPPort and it is failing
* during compilation of this module, please send a report to perlbug@perl.com
*
* Include all following information:
*
* 1. The complete output from running "perl -V"
*
* 2. This file.
*
* 3. The name & version of the module you were trying to build.
*
* 4. A full log of the build that failed.
*
* 5. Any other information that you think could be relevant.
*
*
* For the latest version of this code, please retreive the Devel::PPPort
* module from CPAN.
*
*/
/*
* In order for a Perl extension module to be as portable as possible
* across differing versions of Perl itself, certain steps need to be taken.
* Including this header is the first major one, then using dTHR is all the
* appropriate places and using a PL_ prefix to refer to global Perl
* variables is the second.
*
*/
/* If you use one of a few functions that were not present in earlier
* versions of Perl, please add a define before the inclusion of ppport.h
* for a static include, or use the GLOBAL request in a single module to
* produce a global definition that can be referenced from the other
* modules.
*
* Function: Static define: Extern define:
* newCONSTSUB() NEED_newCONSTSUB NEED_newCONSTSUB_GLOBAL
*
*/
/* To verify whether ppport.h is needed for your module, and whether any
* special defines should be used, ppport.h can be run through Perl to check
* your source code. Simply say:
*
* perl -x ppport.h *.c *.h *.xs foo/bar*.c [etc]
*
* The result will be a list of patches suggesting changes that should at
* least be acceptable, if not necessarily the most efficient solution, or a
* fix for all possible problems. It won't catch where dTHR is needed, and
* doesn't attempt to account for global macro or function definitions,
* nested includes, typemaps, etc.
*
* In order to test for the need of dTHR, please try your module under a
* recent version of Perl that has threading compiled-in.
*
*/
/*
#!/usr/bin/perl
@ARGV = ("*.xs") if !@ARGV;
%badmacros = %funcs = %macros = (); $replace = 0;
foreach (<DATA>) {
$funcs{$1} = 1 if /Provide:\s+(\S+)/;
$macros{$1} = 1 if /^#\s*define\s+([a-zA-Z0-9_]+)/;
$replace = $1 if /Replace:\s+(\d+)/;
$badmacros{$2}=$1 if $replace and /^#\s*define\s+([a-zA-Z0-9_]+).*?\s+([a-zA-Z0-9_]+)/;
$badmacros{$1}=$2 if /Replace (\S+) with (\S+)/;
}
foreach $filename (map(glob($_),@ARGV)) {
unless (open(IN, "<$filename")) {
warn "Unable to read from $file: $!\n";
next;
}
print "Scanning $filename...\n";
$c = ""; while (<IN>) { $c .= $_; } close(IN);
$need_include = 0; %add_func = (); $changes = 0;
$has_include = ($c =~ /#.*include.*ppport/m);
foreach $func (keys %funcs) {
if ($c =~ /#.*define.*\bNEED_$func(_GLOBAL)?\b/m) {
if ($c !~ /\b$func\b/m) {
print "If $func isn't needed, you don't need to request it.\n" if
$changes += ($c =~ s/^.*#.*define.*\bNEED_$func\b.*\n//m);
} else {
print "Uses $func\n";
$need_include = 1;
}
} else {
if ($c =~ /\b$func\b/m) {
$add_func{$func} =1 ;
print "Uses $func\n";
$need_include = 1;
}
}
}
if (not $need_include) {
foreach $macro (keys %macros) {
if ($c =~ /\b$macro\b/m) {
print "Uses $macro\n";
$need_include = 1;
}
}
}
foreach $badmacro (keys %badmacros) {
if ($c =~ /\b$badmacro\b/m) {
$changes += ($c =~ s/\b$badmacro\b/$badmacros{$badmacro}/gm);
print "Uses $badmacros{$badmacro} (instead of $badmacro)\n";
$need_include = 1;
}
}
if (scalar(keys %add_func) or $need_include != $has_include) {
if (!$has_include) {
$inc = join('',map("#define NEED_$_\n", sort keys %add_func)).
"#include \"ppport.h\"\n";
$c = "$inc$c" unless $c =~ s/#.*include.*XSUB.*\n/$&$inc/m;
} elsif (keys %add_func) {
$inc = join('',map("#define NEED_$_\n", sort keys %add_func));
$c = "$inc$c" unless $c =~ s/^.*#.*include.*ppport.*$/$inc$&/m;
}
if (!$need_include) {
print "Doesn't seem to need ppport.h.\n";
$c =~ s/^.*#.*include.*ppport.*\n//m;
}
$changes++;
}
if ($changes) {
open(OUT,">/tmp/ppport.h.$$");
print OUT $c;
close(OUT);
open(DIFF, "diff -u $filename /tmp/ppport.h.$$|");
while (<DIFF>) { s!/tmp/ppport\.h\.$$!$filename.patched!; print STDOUT; }
close(DIFF);
unlink("/tmp/ppport.h.$$");
} else {
print "Looks OK\n";
}
}
__DATA__
*/
#ifndef _P_P_PORTABILITY_H_
#define _P_P_PORTABILITY_H_
#ifndef PERL_REVISION
# ifndef __PATCHLEVEL_H_INCLUDED__
# include "patchlevel.h"
# endif
# ifndef PERL_REVISION
# define PERL_REVISION (5)
/* Replace: 1 */
# define PERL_VERSION PATCHLEVEL
# define PERL_SUBVERSION SUBVERSION
/* Replace PERL_PATCHLEVEL with PERL_VERSION */
/* Replace: 0 */
# endif
#endif
#define PERL_BCDVERSION ((PERL_REVISION * 0x1000000L) + (PERL_VERSION * 0x1000L) + PERL_SUBVERSION)
/* It is very unlikely that anyone will try to use this with Perl 6
(or greater), but who knows.
*/
#if PERL_REVISION != 5
# error ppport.h only works with Perl version 5
#endif /* PERL_REVISION != 5 */
#ifndef ERRSV
# define ERRSV perl_get_sv("@",FALSE)
#endif
#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION <= 5))
/* Replace: 1 */
# define PL_Sv Sv
# define PL_compiling compiling
# define PL_copline copline
# define PL_curcop curcop
# define PL_curstash curstash
# define PL_defgv defgv
# define PL_dirty dirty
# define PL_dowarn dowarn
# define PL_hints hints
# define PL_na na
# define PL_perldb perldb
# define PL_rsfp_filters rsfp_filters
# define PL_rsfpv rsfp
# define PL_stdingv stdingv
# define PL_sv_no sv_no
# define PL_sv_undef sv_undef
# define PL_sv_yes sv_yes
/* Replace: 0 */
#endif
#ifdef HASATTRIBUTE
# if defined(__GNUC__) && defined(__cplusplus)
# define PERL_UNUSED_DECL
# else
# define PERL_UNUSED_DECL __attribute__((unused))
# endif
#else
# define PERL_UNUSED_DECL
#endif
#ifndef dNOOP
# define NOOP (void)0
# define dNOOP extern int Perl___notused PERL_UNUSED_DECL
#endif
#ifndef dTHR
# define dTHR dNOOP
#endif
#ifndef dTHX
# define dTHX dNOOP
# define dTHXa(x) dNOOP
# define dTHXoa(x) dNOOP
#endif
#ifndef pTHX
# define pTHX void
# define pTHX_
# define aTHX
# define aTHX_
#endif
#ifndef UVSIZE
# define UVSIZE IVSIZE
#endif
#ifndef NVTYPE
# if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
# define NVTYPE long double
# else
# define NVTYPE double
# endif
typedef NVTYPE NV;
#endif
#ifndef INT2PTR
#if (IVSIZE == PTRSIZE) && (UVSIZE == PTRSIZE)
# define PTRV UV
# define INT2PTR(any,d) (any)(d)
#else
# if PTRSIZE == LONGSIZE
# define PTRV unsigned long
# else
# define PTRV unsigned
# endif
# define INT2PTR(any,d) (any)(PTRV)(d)
#endif
#define NUM2PTR(any,d) (any)(PTRV)(d)
#define PTR2IV(p) INT2PTR(IV,p)
#define PTR2UV(p) INT2PTR(UV,p)
#define PTR2NV(p) NUM2PTR(NV,p)
#if PTRSIZE == LONGSIZE
# define PTR2ul(p) (unsigned long)(p)
#else
# define PTR2ul(p) INT2PTR(unsigned long,p)
#endif
#endif /* !INT2PTR */
#ifndef boolSV
# define boolSV(b) ((b) ? &PL_sv_yes : &PL_sv_no)
#endif
#ifndef gv_stashpvn
# define gv_stashpvn(str,len,flags) gv_stashpv(str,flags)
#endif
#ifndef newSVpvn
# define newSVpvn(data,len) ((len) ? newSVpv ((data), (len)) : newSVpv ("", 0))
#endif
#ifndef newRV_inc
/* Replace: 1 */
# define newRV_inc(sv) newRV(sv)
/* Replace: 0 */
#endif
/* DEFSV appears first in 5.004_56 */
#ifndef DEFSV
# define DEFSV GvSV(PL_defgv)
#endif
#ifndef SAVE_DEFSV
# define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
#endif
#ifndef newRV_noinc
# ifdef __GNUC__
# define newRV_noinc(sv) \
({ \
SV *nsv = (SV*)newRV(sv); \
SvREFCNT_dec(sv); \
nsv; \
})
# else
# if defined(USE_THREADS)
static SV * newRV_noinc (SV * sv)
{
SV *nsv = (SV*)newRV(sv);
SvREFCNT_dec(sv);
return nsv;
}
# else
# define newRV_noinc(sv) \
(PL_Sv=(SV*)newRV(sv), SvREFCNT_dec(sv), (SV*)PL_Sv)
# endif
# endif
#endif
/* Provide: newCONSTSUB */
/* newCONSTSUB from IO.xs is in the core starting with 5.004_63 */
#if (PERL_VERSION < 4) || ((PERL_VERSION == 4) && (PERL_SUBVERSION < 63))
#if defined(NEED_newCONSTSUB)
static
#else
extern void newCONSTSUB(HV * stash, char * name, SV *sv);
#endif
#if defined(NEED_newCONSTSUB) || defined(NEED_newCONSTSUB_GLOBAL)
void
newCONSTSUB(stash,name,sv)
HV *stash;
char *name;
SV *sv;
{
U32 oldhints = PL_hints;
HV *old_cop_stash = PL_curcop->cop_stash;
HV *old_curstash = PL_curstash;
line_t oldline = PL_curcop->cop_line;
PL_curcop->cop_line = PL_copline;
PL_hints &= ~HINT_BLOCK_SCOPE;
if (stash)
PL_curstash = PL_curcop->cop_stash = stash;
newSUB(
#if (PERL_VERSION < 3) || ((PERL_VERSION == 3) && (PERL_SUBVERSION < 22))
/* before 5.003_22 */
start_subparse(),
#else
# if (PERL_VERSION == 3) && (PERL_SUBVERSION == 22)
/* 5.003_22 */
start_subparse(0),
# else
/* 5.003_23 onwards */
start_subparse(FALSE, 0),
# endif
#endif
newSVOP(OP_CONST, 0, newSVpv(name,0)),
newSVOP(OP_CONST, 0, &PL_sv_no), /* SvPV(&PL_sv_no) == "" -- GMB */
newSTATEOP(0, Nullch, newSVOP(OP_CONST, 0, sv))
);
PL_hints = oldhints;
PL_curcop->cop_stash = old_cop_stash;
PL_curstash = old_curstash;
PL_curcop->cop_line = oldline;
}
#endif
#endif /* newCONSTSUB */
#ifndef START_MY_CXT
/*
* Boilerplate macros for initializing and accessing interpreter-local
* data from C. All statics in extensions should be reworked to use
* this, if you want to make the extension thread-safe. See ext/re/re.xs
* for an example of the use of these macros.
*
* Code that uses these macros is responsible for the following:
* 1. #define MY_CXT_KEY to a unique string, e.g. "DynaLoader_guts"
* 2. Declare a typedef named my_cxt_t that is a structure that contains
* all the data that needs to be interpreter-local.
* 3. Use the START_MY_CXT macro after the declaration of my_cxt_t.
* 4. Use the MY_CXT_INIT macro such that it is called exactly once
* (typically put in the BOOT: section).
* 5. Use the members of the my_cxt_t structure everywhere as
* MY_CXT.member.
* 6. Use the dMY_CXT macro (a declaration) in all the functions that
* access MY_CXT.
*/
#if defined(MULTIPLICITY) || defined(PERL_OBJECT) || \
defined(PERL_CAPI) || defined(PERL_IMPLICIT_CONTEXT)
/* This must appear in all extensions that define a my_cxt_t structure,
* right after the definition (i.e. at file scope). The non-threads
* case below uses it to declare the data as static. */
#define START_MY_CXT
#if (PERL_VERSION < 4 || (PERL_VERSION == 4 && PERL_SUBVERSION < 68 ))
/* Fetches the SV that keeps the per-interpreter data. */
#define dMY_CXT_SV \
SV *my_cxt_sv = perl_get_sv(MY_CXT_KEY, FALSE)
#else /* >= perl5.004_68 */
#define dMY_CXT_SV \
SV *my_cxt_sv = *hv_fetch(PL_modglobal, MY_CXT_KEY, \
sizeof(MY_CXT_KEY)-1, TRUE)
#endif /* < perl5.004_68 */
/* This declaration should be used within all functions that use the
* interpreter-local data. */
#define dMY_CXT \
dMY_CXT_SV; \
my_cxt_t *my_cxtp = INT2PTR(my_cxt_t*,SvUV(my_cxt_sv))
/* Creates and zeroes the per-interpreter data.
* (We allocate my_cxtp in a Perl SV so that it will be released when
* the interpreter goes away.) */
#define MY_CXT_INIT \
dMY_CXT_SV; \
/* newSV() allocates one more than needed */ \
my_cxt_t *my_cxtp = (my_cxt_t*)SvPVX(newSV(sizeof(my_cxt_t)-1));\
Zero(my_cxtp, 1, my_cxt_t); \
sv_setuv(my_cxt_sv, PTR2UV(my_cxtp))
/* This macro must be used to access members of the my_cxt_t structure.
* e.g. MYCXT.some_data */
#define MY_CXT (*my_cxtp)
/* Judicious use of these macros can reduce the number of times dMY_CXT
* is used. Use is similar to pTHX, aTHX etc. */
#define pMY_CXT my_cxt_t *my_cxtp
#define pMY_CXT_ pMY_CXT,
#define _pMY_CXT ,pMY_CXT
#define aMY_CXT my_cxtp
#define aMY_CXT_ aMY_CXT,
#define _aMY_CXT ,aMY_CXT
#else /* single interpreter */
#define START_MY_CXT static my_cxt_t my_cxt;
#define dMY_CXT_SV dNOOP
#define dMY_CXT dNOOP
#define MY_CXT_INIT NOOP
#define MY_CXT my_cxt
#define pMY_CXT void
#define pMY_CXT_
#define _pMY_CXT
#define aMY_CXT
#define aMY_CXT_
#define _aMY_CXT
#endif
#endif /* START_MY_CXT */
#ifndef IVdf
# if IVSIZE == LONGSIZE
# define IVdf "ld"
# define UVuf "lu"
# define UVof "lo"
# define UVxf "lx"
# define UVXf "lX"
# else
# if IVSIZE == INTSIZE
# define IVdf "d"
# define UVuf "u"
# define UVof "o"
# define UVxf "x"
# define UVXf "X"
# endif
# endif
#endif
#ifndef NVef
# if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && \
defined(PERL_PRIfldbl) /* Not very likely, but let's try anyway. */
# define NVef PERL_PRIeldbl
# define NVff PERL_PRIfldbl
# define NVgf PERL_PRIgldbl
# else
# define NVef "e"
# define NVff "f"
# define NVgf "g"
# endif
#endif
#ifndef AvFILLp /* Older perls (<=5.003) lack AvFILLp */
# define AvFILLp AvFILL
#endif
#ifdef SvPVbyte
# if PERL_REVISION == 5 && PERL_VERSION < 7
/* SvPVbyte does not work in perl-5.6.1, borrowed version for 5.7.3 */
# undef SvPVbyte
# define SvPVbyte(sv, lp) \
((SvFLAGS(sv) & (SVf_POK|SVf_UTF8)) == (SVf_POK) \
? ((lp = SvCUR(sv)), SvPVX(sv)) : my_sv_2pvbyte(aTHX_ sv, &lp))
static char *
my_sv_2pvbyte(pTHX_ register SV *sv, STRLEN *lp)
{
sv_utf8_downgrade(sv,0);
return SvPV(sv,*lp);
}
# endif
#else
# define SvPVbyte SvPV
#endif
#endif /* _P_P_PORTABILITY_H_ */
/* End of File ppport.h */